> -----Original Message----- > From: York Sun [mailto:[email protected]] > Sent: Thursday, April 13, 2017 9:15 PM > To: Santan Kumar <[email protected]>; [email protected] > Cc: Priyanka Jain <[email protected]>; Abhimanyu Saini > <[email protected]> > Subject: Re: [PATCH 2/2][v4] armv8: ls2080aqds: Add support for SD boot > > On 04/12/2017 11:18 PM, Santan Kumar wrote: > > <snip> > > >>> > >>> arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 6 +-- > >>> .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 6 +-- > >>> board/freescale/ls2080a/ls2080a.c | 6 +-- > >>> board/freescale/ls2080aqds/eth.c | 8 +--- > >>> board/freescale/ls2080aqds/ls2080aqds.c | 4 +- > >>> configs/ls2080aqds_sdcard_defconfig | 54 > >> ++++++++++++++++++++++ > >>> include/configs/ls2080aqds.h | 9 +++- > >>> 7 files changed, 75 insertions(+), 18 deletions(-) create mode > >>> 100644 configs/ls2080aqds_sdcard_defconfig > >>> > >> > >> Please update MAINTAINERS file and add commit message. Please squash > >> your patch which enables PPA for this boot config > >> http://patchwork.ozlabs.org/patch/741504/ > >> > >> York > > [Santan Kumar] Ok, I will update the MAINTAINERS file and PPA patch. > > In commit message: This patch adds SD boot support for LS2080aqds board. > > The SD boot image need to be programmed into the sdcard first. > > Then the booting will start from sd card. > > Is it ok or do you want me to add any specific information? > > > That's useless. Why do you add SD boot now? If there is a reason we couldn't > have it before, but we can have it now, please explain. > > If there is any particular instruction for SD, please add to the README file. > > York Sd-boot patches has been in-review in upstream from a long time. Also RDB board does not support SD-boot. As a feature SD-boot feature can only be tested on QDS. We will update README with proper instructions.
Priyanka _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
