[email protected] (Wolfgang Wegner) wrote on 29/10/2009 14:41:00: > > Dear Joakim Tjernlund, > > On Thu, Oct 29, 2009 at 02:08:05PM +0100, Joakim Tjernlund wrote: > > > > Just to avoid any misunderstandings, the GOT does not hold offsets, it holds > > absolute addresses. These addresses gets adjusted with an offset when you > > relocate. > > thank you, I already understood this. > > As far as I can see there is already some GOT handling in cpu/mcf532x/start.S > and the flags (-fPIC) in cpu/mcf532x/config.mk (and other coldfire ports, but > MCF532x/MCF537x is what I am currently working on for testing), but somehow > it does not work. > However, it takes some time for me to understand the assembler code, > especially the powerpc counterpart I am using as a reference. > > There is a __got_start and __got_end in my u-boot.map, so I would think > the linker does behave correctly - but I did not yet check if all the > symbols (better: symbols' addresses) expected to be there are really > present: > > .reloc 0x00024600 0x1990 > 0x00024600 __got_start = . > *(.got) > .got 0x00024600 0x1990 cpu/mcf532x/cpu_init.o > 0x00025f90 __got_end = . > 0x00025f90 _GOT2_TABLE_ = . > *(.got2) > 0x00025f90 _FIXUP_TABLE_ = . > *(.fixup) > 0x00000000 __got2_entries = ((_FIXUP_TABLE_ - > _GOT2_TABLE_) >> 0x2) > 0x00000000 __fixup_entries = ((. - > _FIXUP_TABLE_) >> 0x2)
It seems like you don't have any relocation data as both __got2_entries and __fixup_entries are zero. Something seems broken in general, perhaps your linker script is bust? > > (flash resides at 0x0, SDRAM at 0x4000000 and CONFIG_SYS_MONITOR_BASE is > 0x40020000) _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot

