Hi Kosta,
On 19.04.2017 10:50, Kostya Porotchkin wrote:
Hi, Stefan,
-----Original Message-----
From: Stefan Roese [mailto:s...@denx.de]
Sent: Wednesday, April 19, 2017 11:45
To: Kostya Porotchkin; u-boot@lists.denx.de
Cc: Igal Liberman; Nadav Haklai
Subject: [EXT] Re: [PATCH 5/5] arm64: mvebu: a8k: Add NAND configuration
parameters
External Email
----------------------------------------------------------------------
Hi Kosta,
On 28.03.2017 17:16, kos...@marvell.com wrote:
From: Konstantin Porotchkin <kos...@marvell.com>
Add NAND configuration parameters to A8K shared config file.
Add defconfig for db-88f7040 board with boot from NAND setup.
Signed-off-by: Konstantin Porotchkin <kos...@marvell.com>
Cc: Stefan Roese <s...@denx.de>
Cc: Igal Liberman <ig...@marvell.com>
Cc: Nadav Haklai <nad...@marvell.com>
---
configs/mvebu_db-88f7040-nand_defconfig | 72
+++++++++++++++++++++++++++++++++
include/configs/mvebu_armada-8k.h | 11 +++++
2 files changed, 83 insertions(+)
create mode 100644 configs/mvebu_db-88f7040-nand_defconfig
I'm currently testing this patchset and get this compilation error via
Travis:
aarch64: + mvebu_db-88f7040-nand
+drivers/mtd/nand/pxa3xx_nand.c: In function alloc_nand_resource:
+drivers/mtd/nand/pxa3xx_nand.c:1513:36: error: MVEBU_NAND_BASE
+undeclared (first use in this function)
+ info->mmio_base = (void __iomem *)MVEBU_NAND_BASE;
Did I miss a patch that adds this macro for A7/8k?
[Konstantin Porotchkin]
The hardcoded values should be changed in the following patch:
[PATCH 1/5] fix: nand: pxa3xx: Remove hardcode values from the driver
However I do not see it on patchworks site.
Should I re-send it?
No need. I've found it in my inbox. Travis build is already restarted...
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
