As requested, I added the CONFIG_TWL4030_POWER to Kconfig and made it
the implied default when selecting OMAP34XX as a platform.
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7812f21..f9ecded 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,7 @@ config OMAP34XX
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
imply SYS_THUMB_BUILD
+ imply TWL4030_POWER
config OMAP44XX
bool "OMAP44XX SoC"
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 64e5bc2..4b00b35 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -304,4 +304,11 @@ config SY8106A_VOUT1_VOLT
is typically used to power the VDD-CPU and should be 1200mV.
Values can range from 680mV till 1950mV.
+config TWL4030_POWER
+ depends on OMAP34XX
+ bool "Enable driver for TI TWL4030 power management chip"
+ ---help---
+ The TWL4030 in a combination audio CODEC/power management with
+ GPIO and it is commonly used with the OMAP3 family of processors
+
endmenu
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
