于 2017年5月4日 GMT+08:00 上午12:50:52, Jagan Teki <[email protected]> 写到: >On Wednesday 03 May 2017 05:48 PM, Olliver Schinagl wrote: >> This patch adds support for the Olimex OLinuXino Lime2 with eMMC >flash >> storage. >> >https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/ >> >> It is a assembly variant of the regular Lime2 but featuring eMMC for >> storage. >> >> Signed-off-by: Olliver Schinagl <[email protected]> >> --- >> >> Note: for the board to work properly, the updated eMMC dts variant >needs to >> be updated from upstream. >> >> board/sunxi/MAINTAINERS | 5 +++++ >> configs/A20-OLinuXino-Lime2-eMMC_defconfig | 33 >++++++++++++++++++++++++++++++ >> 2 files changed, 38 insertions(+) >> create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig >> >> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS >> index 2321b8b08f..84f91fd10b 100644 >> --- a/board/sunxi/MAINTAINERS >> +++ b/board/sunxi/MAINTAINERS >> @@ -89,6 +89,11 @@ M: Iain Paton <[email protected]> >> S: Maintained >> F: configs/A20-OLinuXino-Lime2_defconfig >> >> +A20-OLINUXINO-LIME2-EMMC BOARD >> +M: Olliver Schinagl <[email protected]> >> +S: Maintained >> +F: configs/A20-OLinuXino-Lime2-eMMC_defconfig >> + >> A33-OLINUXINO BOARD >> M: Stefan Mavrodiev <[email protected]> >> S: Maintained >> diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig >b/configs/A20-OLinuXino-Lime2-eMMC_defconfig > >I guess you used the latest, right? I got the below error with 4.7.1 >and >even buildman does. > >arm-linux-gnueabi-ld.bfd: u-boot-spl section `.u_boot_list' will not >fit >in region `.sram' >arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 88 bytes >arm-linux-gnueabi-ld.bfd: u-boot-spl: Not enough room for program >headers, try linking with -N >arm-linux-gnueabi-ld.bfd: final link failed: Bad value
Try a newer GCC? > >thanks! _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
