On Thu, May 4, 2017 at 12:11 PM, Jagan Teki <[email protected]> wrote: > From: Jagan Teki <[email protected]> > > Enable DM_I2C, DM_PMIC and DM_PMIC_PFUZE100 for dt > supported sabresd config board > > I2C Log: > -------- > => i2c bus > Bus 0: i2c@021a0000 > Bus 1: i2c@021a4000 > 08: pfuze100@08, offset len 1, flags 0 > Bus 2: i2c@021a8000 > => i2c dev 1 > Setting bus to 1 > => i2c speed 100000 > Setting bus speed to 100000 Hz > => i2c probe > Valid chip addresses: 08 48 > => i2c md 08 0x0 0x20 > 0000: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 ................ > 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > => i2c md 48 0x0 0x20 > 0000: 00 f0 00 00 00 00 00 00 00 00 00 80 70 41 41 41 ............pAAA > 0010: 00 00 00 80 70 41 41 41 41 41 41 41 41 41 41 41 ....pAAAAAAAAAAA > > Cc: Stefano Babic <[email protected]> > Cc: Fabio Estevam <[email protected]> > Cc: Michael Trimarchi <[email protected]> > Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]> _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
