On 05/11/2017 01:36 AM, Yogesh Gaur wrote:
On LS2081ARDB both QSPI and DSPI are having flash n25q512a of micron family
which supports EAR Read/Write cmds, thus enable CONFIG_SPI_FLASH_BAR config.
Else only lower 16MiB accessible for these flashes.
Signed-off-by: Yogesh Gaur <[email protected]>
---
Depends on :
https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F755920%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C6990807b3cc340bcf5d208d49848c6ee%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=EIlAri7rShB22Yggt2juWDkBGK5PnxyO3RE9rfDEQlc%3D&reserved=0
include/configs/ls2080ardb.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 6abf54b..08ac9a9 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -299,6 +299,11 @@ unsigned long get_board_sys_clk(void);
#ifdef CONFIG_FSL_QSPI
#ifdef CONFIG_TARGET_LS2081ARDB
#define CONFIG_SPI_FLASH_STMICRO
+/*
+ * On LS2081ARDB both QSPI and DSPI are having flash n25q512a of micron
+ * family which supports EAR Read/Write cmds, thus enable below config
+ */
+#define CONFIG_SPI_FLASH_BAR
#else
#define CONFIG_SPI_FLASH_SPANSION
#endif
Suresh,
Is this impacted by the same QSPI driver you are working on?
York
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
