Instead of counting only the DRAM in the first slot, count all the DRAM in all slots and report it accordingly.
Signed-off-by: Marek Vasut <[email protected]> Cc: Hiroyuki Yokoyama <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> --- board/renesas/salvator-x/salvator-x.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c index 44e4006f5c..14385d7361 100644 --- a/board/renesas/salvator-x/salvator-x.c +++ b/board/renesas/salvator-x/salvator-x.c @@ -235,8 +235,36 @@ int board_mmc_init(bd_t *bis) int dram_init(void) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + gd->ram_size = PHYS_SDRAM_1_SIZE; +#if (CONFIG_NR_DRAM_BANKS >= 2) + gd->ram_size += PHYS_SDRAM_2_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 3) + gd->ram_size += PHYS_SDRAM_3_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 4) + gd->ram_size += PHYS_SDRAM_4_SIZE; +#endif + + return 0; +} +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +#if (CONFIG_NR_DRAM_BANKS >= 2) + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 3) + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 4) + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; +#endif return 0; } -- 2.11.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
