On 05/15/2017 08:01 PM, Alison Wang wrote: > This patch is to adjust the memory mapping for FLash/SD card on > LS1046AQDS and LS1046ARDB, such as FMAN firmware load address, U-Boot > start address on serial flash and environment address. > > Signed-off-by: Alison Wang <[email protected]> > --- > Changes: > - Update the comments and README. > > board/freescale/ls1046ardb/README | 16 ++++++++-------- > include/configs/ls1046a_common.h | 10 +++++----- > include/configs/ls1046aqds.h | 10 +++++----- > include/configs/ls1046ardb.h | 4 ++-- > 4 files changed, 20 insertions(+), 20 deletions(-) > > diff --git a/board/freescale/ls1046ardb/README > b/board/freescale/ls1046ardb/README > index 1ef7d47..a38c9d4 100644 > --- a/board/freescale/ls1046ardb/README > +++ b/board/freescale/ls1046ardb/README > @@ -59,14 +59,14 @@ Start Address End Address Description > Size > QSPI flash map: > Start Address End Address Description Size > 0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB > -0x00_4010_0000 - 0x00_401F_FFFF U-Boot 1MB > -0x00_4020_0000 - 0x00_402F_FFFF U-Boot Env 1MB > -0x00_4030_0000 - 0x00_403F_FFFF FMan ucode 1MB > -0x00_4040_0000 - 0x00_404F_FFFF UEFI 1MB > -0x00_4050_0000 - 0x00_406F_FFFF PPA 2MB > -0x00_4070_0000 - 0x00_408F_FFFF Secure boot header > - + bootscript 2MB > -0x00_4090_0000 - 0x00_40FF_FFFF Reserved 7MB > +0x00_4010_0000 - 0x00_402F_FFFF U-Boot 2MB > +0x00_4030_0000 - 0x00_403F_FFFF U-Boot Env 1MB > +0x00_4040_0000 - 0x00_405F_FFFF PPA 2MB > +0x00_4060_0000 - 0x00_408F_FFFF Secure boot header > + + bootscript 3MB > +0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB > +0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB > +0x00_4098_0000 - 0x00_40FF_FFFF Reserved 6MB > 0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB > > Booting Options > diff --git a/include/configs/ls1046a_common.h > b/include/configs/ls1046a_common.h > index 957ffd3..61bf3eb 100644 > --- a/include/configs/ls1046a_common.h > +++ b/include/configs/ls1046a_common.h > @@ -166,23 +166,23 @@ > /* > * PBL SD boot image should stored at 0x1000(8 blocks), the size of the > image is > * about 1MB (2048 blocks), Env is stored after the image, and the env size > is > - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). > + * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
I was expecting a good reason for this offset change. Guess there isn't one, except to align the offset for all boards. York _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
