modify u_qe_init to upload QE firmware from SD card when it is SD
boot
Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
---
Changes for v2:
- fix issue of memory leak
Changes for v3:
- add CONFIG_SYS_QE_FMAN_FW_IN_NOR to ls1021a
Changes for v4:
- rebase due to memory-mapping conflict
Changes for v5:
- fix compile issue for PowerPC
drivers/qe/qe.c | 36 +++++++++++++++++++++++++++++++++++-
include/configs/ls1021aqds.h | 1 +
include/configs/ls1021atwr.h | 1 +
include/configs/ls1043a_common.h | 2 ++
include/configs/ls1043ardb.h | 4 +---
5 files changed, 40 insertions(+), 4 deletions(-)
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 4f0a278..24e764d 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <malloc.h>
#include <command.h>
#include <linux/errno.h>
#include <asm/io.h>
@@ -17,6 +18,10 @@
#include <asm/arch/immap_ls102xa.h>
#endif
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#include <mmc.h>
+#endif
+
#define MPC85xx_DEVDISR_QE_DISABLE 0x1
qe_map_t *qe_immr = NULL;
@@ -194,8 +199,37 @@ void u_qe_init(void)
{
qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
- u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
+ void *addr = (void *)CONFIG_SYS_QE_FW_ADDR;
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512;
+ u32 blk = CONFIG_SYS_QE_FW_ADDR / 512;
+
+ if (mmc_initialize(gd->bd)) {
+ printf("%s: mmc_initialize() failed\n", __func__);
+ return;
+ }
+ addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc) {
+ free(addr);
+ printf("\nMMC cannot find device for ucode\n");
+ } else {
+ printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+ (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
+ addr);
+ /* flush cache after read */
+ flush_cache((ulong)addr, cnt * 512);
+ }
+#endif
+ u_qe_upload_firmware(addr);
out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+ free(addr);
+#endif
}
#endif
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 5fcaf85..fb077fb 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -125,6 +125,7 @@ unsigned long get_board_ddr_clk(void);
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif
/*
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 2a20dec..240c2e2 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -150,6 +150,7 @@
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif
/*
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 155da92..56f5ee6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -219,6 +219,7 @@
*/
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
+#define CONFIG_SYS_QE_FW_ADDR (512 * 0x4a08)
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
@@ -230,6 +231,7 @@
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
/* FMan fireware Pre-load address */
#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
+#define CONFIG_SYS_QE_FW_ADDR 0x60940000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index a162378..2ce7ddd 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -277,11 +277,9 @@
/* QE */
#ifndef SPL_NO_QE
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
- !defined(CONFIG_QSPI_BOOT)
+#if !defined(CONFIG_NAND_BOOT) && !defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif
-#define CONFIG_SYS_QE_FW_ADDR 0x60940000
#endif
/* USB */
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
