Silicon v1 didn't support SD boot mode with level shifter. Because system can't boot any error message is not shown that's why comment is just a record if someone tries to debug it.
Signed-off-by: Michal Simek <[email protected]> --- arch/arm/cpu/armv8/zynqmp/spl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c index e5a413954a5b..779497ca6d0b 100644 --- a/arch/arm/cpu/armv8/zynqmp/spl.c +++ b/arch/arm/cpu/armv8/zynqmp/spl.c @@ -84,7 +84,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_RAM; #ifdef CONFIG_SPL_MMC_SUPPORT case SD_MODE1: - case SD1_LSHFT_MODE: + case SD1_LSHFT_MODE: /* not working on silicon v1 */ /* if both controllers enabled, then these two are the second controller */ #if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1) return BOOT_DEVICE_MMC2; -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
