Hi Marcel, On 29 May 2017 at 09:08, Marcel Ziswiler <marcel.ziswi...@toradex.com> wrote: > Hi Simon > > On Fri, 2017-05-19 at 08:31 -0600, Simon Glass wrote: >> Change this board to use a live device tree after relocation. >> >> Signed-off-by: Simon Glass <s...@chromium.org> >> --- >> >> configs/nyan-big_defconfig | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig >> index a152ff6915..82be85a834 100644 >> --- a/configs/nyan-big_defconfig >> +++ b/configs/nyan-big_defconfig >> @@ -33,6 +33,7 @@ CONFIG_CMD_EXT4_WRITE=y >> # CONFIG_SPL_DOS_PARTITION is not set >> # CONFIG_SPL_ISO_PARTITION is not set >> # CONFIG_SPL_EFI_PARTITION is not set >> +CONFIG_OF_LIVE=y >> CONFIG_SPL_DM=y >> CONFIG_REGMAP=y >> CONFIG_SYSCON=y > > Doing the same on dm/master for Apalis TK1 gives me the following: > > U-Boot 2017.05-00795-g40fcab4-dirty (May 29 2017 - 16:52:17 +0200) > > TEGRA124 > DRAM: 2 GiB > Error binding driver 'gpio_tegra': -22 > Some drivers failed to bind > initcall sequence fffad294 failed at call 80124360 (err=-22) > ### ERROR ### Please RESET the board ### > > Do you happen to know what may go wrong here?
Not really. Can you diagnose it? I suspect it is in gpio_tegra_bind(). > > I do actually even own a nyan-big but so far never run any mainline > stuff on it as I am missing Servo and/or Yoshi et. al. Sure. I did send a chain series (u-boot-dm/chain-working) which allows it to run without those. > > Is there any particular reason you did not do this on a more accessible > platform like e.g. Jetson TK1? I do have one of those boards, but unfortunately I cannot find it. I'm hoping to track it down in the next month or so. > > BTW: The same happens on Jetson TK1 once I enable live tree: > > U-Boot SPL 2017.05-00795-g40fcab4-dirty (May 29 2017 - 17:03:18) > Trying to boot from RAM > > U-Boot 2017.05-00795-g40fcab4-dirty (May 29 2017 - 17:03:18 +0200) > > TEGRA124 > Model: NVIDIA Jetson TK1 > Board: NVIDIA Jetson TK1 > DRAM: 2 GiB > Error binding driver 'gpio_tegra': -22 > Some drivers failed to bind > initcall sequence fffa8ba4 failed at call 801235b8 (err=-22) > ### ERROR ### Please RESET the board ### > > Cheers > > Marcel Thank you for testing. I do have a beaver as well so may be able to repeat it on that. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot