On 31 May 2017 at 10:17, Philipp Tomsich <philipp.toms...@theobroma-systems.com> wrote: > On the RK3399-Q7, the on-module USB3 hub is held in reset at boot-up > to save power and needs to be woken up using GPIO4A3. > > Note that this is not a negated reset-signal (due to a level shifter > being needed for this signal anyway), but a negated enable-signal: > to enable, we need to output LOW (i.e. 0)... so we mark this as an > ACTIVE_LOW signal. > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > --- > > arch/arm/dts/rk3399-puma.dts | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-)
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot