With the new dev_read functions available, we can convert the rockchip architecture-specific drivers and common drivers used by these devices over to the dev_read family of calls.
This covers the serial driver (ns16550 and compatible) used for the Rockchip devices. Signed-off-by: Philipp Tomsich <[email protected]> --- drivers/serial/ns16550.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 52c52c1..e0e7024 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -434,10 +434,8 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); #endif - plat->reg_offset = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "reg-offset", 0); - plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "reg-shift", 0); + plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0); + plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0); err = clk_get_by_index(dev, 0, &clk); if (!err) { @@ -450,9 +448,8 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) } if (!plat->clock) - plat->clock = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "clock-frequency", - CONFIG_SYS_NS16550_CLK); + plat->clock = dev_read_u32_default(dev, "clock-frequency", + CONFIG_SYS_NS16550_CLK); if (!plat->clock) { debug("ns16550 clock not defined\n"); return -EINVAL; -- 2.1.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
