于 2017年6月8日 GMT+08:00 下午8:41:41, Jagan Teki <[email protected]> 写到: >On Sat, Jun 3, 2017 at 2:40 PM, Icenowy Zheng <[email protected]> wrote: >> This patchset contains several works on the sunxi DesignWare DRAM >> controllers. >> >> The 1st patch made an option for H3-like DRAM controllers >> (DesignWare ones), which can ease further import of alike >controllers. >> >> The 2nd and 3rd patches are for supporting 16-bit DW DRAM >controllers, >> in order to add V3s DRAM support (The controller on V3s is 16-bit). >> >> The 4th patch adds bank detection code, in order to support some DDR2 >> chips. >> >> The 5th patch adds a framework for select DRAM type and timing -- >it's >> needed for boards that use DRAM chips rather than DDR3. >> >> The 6th patch enables dual rank detection in the DW DRAM code on SoCs >> except R40. For R40 the dual rank facility is still not so clear, so >it's >> temporarily disabled. >> >> The 7th~9th patches enables support for DRAM initialization and SPL >for >> the V3s SoC, which integrates a DDR2 chip. >> >> The 10th and 11th patches adds support for LPDDR3, with the stock >boot0 >> timing. (Seen in A83T boot0 source and some leaked H5/R40 libdram >source) >> >> The 12th patches adds a defconfig for SoPine w/ official baseboard, >which >> utilizes LPDDR3. >> >> Icenowy Zheng (12): >> sunxi: makes an invisible option for H3-like DRAM controllers >> sunxi: Rename bus-width related macros in H3 DRAM code >> sunxi: add option for 16-bit DW DRAM controller >> sunxi: add bank detection code to H3 DRAM initialization code >> sunxi: Add selective DRAM type and timing >> sunxi: enable dual rank detection in DesignWare-like DRAM code >> sunxi: add support for the DDR2 in V3s SoC >> sunxi: add support for V3s DRAM controller >> sunxi: enable DRAM initialization and SPL for V3s SoC >> sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM >> controller >> sunxi: add LPDDR3 timing from stock boot0 >> sunxi: add a defconfig for SoPine w/ official baseboard > >I think you forgot to add MAINTAINERS update which I commented >previous, anyway if you're OK I will add and apply the series?
Of course. Thanks! > >thanks! _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
