Tested on ls1046ardb with automatically boot Ubuntu from SD card or
USB disk, if it fails to detect external storage disk, fall back to
qspi boot.
Signed-off-by: Shengzhou Liu <shengzhou....@nxp.com>
Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com>
---
v2:
- No change.
configs/ls1046ardb_qspi_defconfig | 1 +
configs/ls1046ardb_sdcard_defconfig | 1 +
include/configs/ls1046a_common.h | 42 +++++++++++++++++++++++++++++++------
include/configs/ls1046aqds.h | 1 +
include/configs/ls1046ardb.h | 6 ++----
5 files changed, 41 insertions(+), 10 deletions(-)
diff --git a/configs/ls1046ardb_qspi_defconfig
b/configs/ls1046ardb_qspi_defconfig
index a8e8876..5be1846 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -35,3 +35,4 @@ CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1046ardb_sdcard_defconfig
b/configs/ls1046ardb_sdcard_defconfig
index 244c58a..6ee3b43 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -41,3 +41,4 @@ CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 1b91676..490744a 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -201,20 +201,54 @@
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
#ifndef SPL_NO_MISC
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x80100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "load_addr=0xa0000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
"kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"console=ttyS0,115200\0" \
- MTDPARTS_DEFAULT "\0"
+ MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1046ardb_boot.scr\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls1046ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_start $kernel_size && bootm $load_addr#$board\0"
+
#define CONFIG_BOOTARGS "console=ttyS0,115200
root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500 " \
@@ -228,10 +262,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
#define CONFIG_SYS_LONGHELP
-#ifndef SPL_NO_MISC
-#define CONFIG_CMDLINE_EDITING 1
-#endif
-
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 645cd9c..1b66c94 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -466,6 +466,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMDLINE_TAG
+#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
"e0000 f00000 && bootm $kernel_load"
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index fb04248..b29fbad 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -243,10 +243,8 @@
#endif
#ifndef SPL_NO_MISC
-#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \
- "$kernel_start $kernel_size;" \
- "bootm $kernel_load"
-
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
"15m(u-boot),48m(kernel.itb);" \
"7e800000.flash:16m(nand_uboot)," \
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
