config_board_mux() is dependent on 'hwconfig' env read value. For some bootloaders like QSPI, env is ready only after relocation. So delay execution of config_board_mux() to misc_init_r().
Signed-off-by: Santan Kumar <[email protected]> --- board/freescale/ls2080ardb/ls2080ardb.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 9d21d1e..c398844 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -195,25 +195,12 @@ int config_board_mux(int ctrl_type) int board_init(void) { - char *env_hwconfig; - u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; #ifdef CONFIG_FSL_MC_ENET u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; #endif - u32 val; init_final_memctl_regs(); - val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); - - env_hwconfig = getenv("hwconfig"); - - if (hwconfig_f("dspi", env_hwconfig) && - DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) - config_board_mux(MUX_TYPE_DSPI); - else - config_board_mux(MUX_TYPE_SDHC); - #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif @@ -248,6 +235,20 @@ int board_early_init_f(void) int misc_init_r(void) { + char *env_hwconfig; + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 val; + + val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); + + env_hwconfig = getenv("hwconfig"); + + if (hwconfig_f("dspi", env_hwconfig) && + DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) + config_board_mux(MUX_TYPE_DSPI); + else + config_board_mux(MUX_TYPE_SDHC); + /* * LS2081ARDB RevF board has smart voltage translator * which needs to be programmed to enable high speed SD interface -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
