Certain peripherals used by K2G GP aren't used on K2G ICE evm. Or
configuration is slightly different. Therefore, use board detection to
deal with these variations.
Signed-off-by: Franklin S Cooper Jr <fcoo...@ti.com>
Reviewed-by: Tom Rini <tr...@konsulko.com>
---
board/ti/ks2_evm/board_k2g.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 3622312..9001255 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -208,7 +208,9 @@ int board_mmc_init(bd_t *bis)
return -1;
}
- omap_mmc_init(0, 0, 0, -1, -1);
+ if (board_is_k2g_gp())
+ omap_mmc_init(0, 0, 0, -1, -1);
+
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
@@ -278,11 +280,13 @@ int embedded_dtb_select(void)
k2g_reset_mux_config();
- /* deassert FLASH_HOLD */
- clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
- BIT(9));
- setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
- BIT(9));
+ if (board_is_k2g_gp()) {
+ /* deassert FLASH_HOLD */
+ clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
+ BIT(9));
+ setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
+ BIT(9));
+ }
return 0;
}
--
2.10.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
