Hi Bin,
On 16.06.2017 16:06, Bin Meng wrote:
Hi Stefan,
On Fri, Jun 16, 2017 at 9:31 PM, Bin Meng <bmeng...@gmail.com> wrote:
Now that xHCD does not use CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS,
remove it in all boards' config files.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
include/configs/am43xx_evm.h | 1 -
include/configs/am57xx_evm.h | 1 -
include/configs/cl-som-am57x.h | 1 -
include/configs/cm_t43.h | 1 -
include/configs/dra7xx_evm.h | 1 -
include/configs/ds414.h | 1 -
include/configs/exynos5-common.h | 1 -
include/configs/ls1012afrdm.h | 1 -
include/configs/ls1012aqds.h | 1 -
include/configs/ls1012ardb.h | 1 -
include/configs/ls1021aiot.h | 1 -
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/ls1043aqds.h | 1 -
include/configs/ls1043ardb.h | 1 -
include/configs/ls1046aqds.h | 1 -
include/configs/ls1046ardb.h | 1 -
include/configs/ls2080aqds.h | 1 -
include/configs/ls2080ardb.h | 1 -
include/configs/mvebu_armada-37xx.h | 4 +---
include/configs/mvebu_armada-8k.h | 4 +---
include/configs/rk3328_common.h | 2 --
include/configs/rk3399_common.h | 3 ---
include/configs/ti_armv7_keystone2.h | 1 -
include/configs/uniphier.h | 3 ---
include/configs/xilinx_zynqmp.h | 2 --
scripts/config_whitelist.txt | 1 -
27 files changed, 2 insertions(+), 37 deletions(-)
[snip]
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2dab065..0a4c90c 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -349,7 +349,6 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#undef CONFIG_CMDLINE_EDITING
#include <config_distro_defaults.h>
diff --git a/include/configs/mvebu_armada-37xx.h
b/include/configs/mvebu_armada-37xx.h
index 5408490..7a255a1 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -98,10 +98,8 @@
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB 3.0 */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
-
#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS +
\
- CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
+ 3)
I strongly suspect here CONFIG_USB_MAX_CONTROLLER_COUNT is mistakenly
configured, unless each host controller only has 1 root port? Please
review.
Yes, you seem to be correct, thanks.
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
