xHCI uses normal TRBs for both bulk and interrupt. This adds the
missing interrupt transfer support to xHCI so that devices like
USB keyboard that uses interrupt transfer can work.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
drivers/usb/host/xhci.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a82502c..c0d0b4a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -890,11 +890,18 @@ unknown:
static int _xhci_submit_int_msg(struct usb_device *udev, unsigned long pipe,
void *buffer, int length, int interval)
{
+ if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
+ printf("non-interrupt pipe (type=%lu)", usb_pipetype(pipe));
+ return -EINVAL;
+ }
+
/*
- * TODO: Not addressing any interrupt type transfer requests
- * Add support for it later.
+ * xHCI uses normal TRBs for both bulk and interrupt. When the
+ * interrupt endpoint is to be serviced, the xHC will consume
+ * (at most) one TD. A TD (comprised of sg list entries) can
+ * take several service intervals to transmit.
*/
- return -EINVAL;
+ return xhci_bulk_tx(udev, pipe, length, buffer);
}
/**
--
2.9.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
