As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
---
common/env_nand.c | 33 +++++++++++++++++++++------------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/common/env_nand.c b/common/env_nand.c
index 2e28171..133ecfb 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -130,17 +130,22 @@ static int writeenv(size_t offset, u_char *buf)
size_t end = offset + CONFIG_ENV_RANGE;
size_t amount_saved = 0;
size_t blocksize, len;
+ struct mtd_info *mtd;
u_char *char_ptr;
- blocksize = nand_info[0]->erasesize;
+ mtd = get_nand_dev_by_index(0);
+ if (!mtd)
+ return 1;
+
+ blocksize = mtd->erasesize;
len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
while (amount_saved < CONFIG_ENV_SIZE && offset < end) {
- if (nand_block_isbad(nand_info[0], offset)) {
+ if (nand_block_isbad(mtd, offset)) {
offset += blocksize;
} else {
char_ptr = &buf[amount_saved];
- if (nand_write(nand_info[0], offset, &len, char_ptr))
+ if (nand_write(mtd, offset, &len, char_ptr))
return 1;
offset += blocksize;
@@ -161,13 +166,15 @@ struct env_location {
static int erase_and_write_env(const struct env_location *location,
u_char *env_new)
{
+ struct mtd_info *mtd;
int ret = 0;
- if (!nand_info[0])
+ mtd = get_nand_dev_by_index(0);
+ if (!mtd)
return 1;
printf("Erasing %s...\n", location->name);
- if (nand_erase_opts(nand_info[0], &location->erase_opts))
+ if (nand_erase_opts(mtd, &location->erase_opts))
return 1;
printf("Writing to %s... ", location->name);
@@ -248,22 +255,24 @@ static int readenv(size_t offset, u_char *buf)
size_t end = offset + CONFIG_ENV_RANGE;
size_t amount_loaded = 0;
size_t blocksize, len;
+ struct mtd_info *mtd;
u_char *char_ptr;
- if (!nand_info[0])
+ mtd = get_nand_dev_by_index(0);
+ if (!mtd)
return 1;
- blocksize = nand_info[0]->erasesize;
+ blocksize = mtd->erasesize;
len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
while (amount_loaded < CONFIG_ENV_SIZE && offset < end) {
- if (nand_block_isbad(nand_info[0], offset)) {
+ if (nand_block_isbad(mtd, offset)) {
offset += blocksize;
} else {
char_ptr = &buf[amount_loaded];
- if (nand_read_skip_bad(nand_info[0], offset,
+ if (nand_read_skip_bad(mtd, offset,
&len, NULL,
- nand_info[0]->size, char_ptr))
+ mtd->size, char_ptr))
return 1;
offset += blocksize;
@@ -390,12 +399,12 @@ void env_relocate_spec(void)
ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE);
#if defined(CONFIG_ENV_OFFSET_OOB)
+ struct mtd_info *mtd = get_nand_dev_by_index(0);
/*
* If unable to read environment offset from NAND OOB then fall through
* to the normal environment reading code below
*/
- if (nand_info[0] && !get_nand_env_oob(nand_info[0],
- &nand_env_oob_offset)) {
+ if (mtd && !get_nand_env_oob(mtd, &nand_env_oob_offset)) {
printf("Found Environment offset in OOB..\n");
} else {
set_default_env("!no env offset in OOB");
--
2.10.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
