On 07/07/2017 16:30, Tom Rini wrote:
On Fri, Jul 07, 2017 at 01:44:39PM +0200, Jean-Jacques Hiblot wrote:
u-boot can be embedded within a FIT image with multiple DTBs. It then
selects at run-time which one is best suited for the platform.
Use the same principle here for the SPL: put the DTBs in a FIT image,
compress it (LZO, GZIP, or no compression) and append it at the end of the
SPL.
Signed-off-by: Jean-Jacques Hiblot <[email protected]>
---
The impact in terms of boot time is not high when using LZO but I gues it can
vary
from platform to platform.
The size of the SPL binary is increased (1.5kB more code on ARM), but the
compression
really flattens the DTBS. so at the end of the day, enabling this option
doesn't add much.
Here are some sumbers with a DRA7 platform (numbers in bytes):
size delta with ref
MLO.reference 123450
MLO.lzo_1_DTB 123715 +265
MLO.lzo_4_DTB 124237 +787
MLO.gzip_4_DTB 132006 +8556
MLO.no_comp_4_DTB 134184 +10734
Bearing in mind that you said in a follow up this is RFC, I'm ignoring
all of the stuff that I believe you would fix in a v1. At the heart of
it, are you able to tell different boards before you have a DTB loaded?
In my case (DRA7) the board can be identified before the dtb is loaded.
The identification
is done by reading an eeprom on I2c. It just can't be using DM I2C in
the SPL.
I keep coming back to the problem that for SPL it seems like we should
be able to do what Franklin did for keystone
(https://patchwork.ozlabs.org/patch/777242/) and have a 'fake' dts file
that represents the SoC such that any real boards can get U-Boot loaded
and from there have the real board dtb be used. Or am I forgetting
something? Thanks!
That's more or less the situation now with DRA7. This idea comes from
the need to accelerate the fastboot path by using the HS200 mode of the
eMMC. There we need to configure the lines of the eMMC and this
information is typically found in the DTB and differs from SOC to SOC.
At the moment in the ti tree this is done by duplicating this
information in C structures protected with #ifdef CONFIG_SPL_BUILD.
While this works, it would be nicer to get it from the dtb as done in
u-boot.
Jean-Jacques
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
