Hi Mario, On 14 July 2017 at 05:55, Mario Six <[email protected]> wrote: > Add a comman to debug the IHS FPGA's bus. > > Signed-off-by: Mario Six <[email protected]> > --- > > cmd/Kconfig | 5 ++ > cmd/Makefile | 1 + > cmd/ihs_fpga.c | 269 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 275 insertions(+) > create mode 100644 cmd/ihs_fpga.c
This should be more generic as per the driver - e.g. a read/write() method that supports an access size parameter. Is there any way we can make some of the code common with things like 'md'? > > diff --git a/cmd/Kconfig b/cmd/Kconfig > index 4bbe9d435c..6d13c681cb 100644 > --- a/cmd/Kconfig > +++ b/cmd/Kconfig > @@ -753,6 +753,11 @@ config CMD_SATA > Attachment, where AT refers to an IBM AT (Advanced Technology) > computer released in 1984. > > +config CMD_IHS_FPGA > + bool "fpga" > + help > + Enable the GDSYS IHS FPGA command for accessing the FPGA's regisers. > + Regards, Simon _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
