The regulator_enable() should be called from upper layer like regulators_enable_boot_on(), remove it from pwm regulator driver.
Signed-off-by: Kever Yang <[email protected]> --- drivers/power/regulator/pwm_regulator.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/power/regulator/pwm_regulator.c b/drivers/power/regulator/pwm_regulator.c index fcf5e00..b63f941 100644 --- a/drivers/power/regulator/pwm_regulator.c +++ b/drivers/power/regulator/pwm_regulator.c @@ -86,12 +86,8 @@ static int pwm_regulator_set_voltage(struct udevice *dev, int uvolt) return ret; } - ret = pwm_set_enable(priv->pwm, priv->pwm_id, true); - if (ret) { - dev_err(dev, "Failed to enable PWM\n"); - return ret; - } priv->volt_uV = uvolt; + return ret; } @@ -144,8 +140,6 @@ static int pwm_regulator_probe(struct udevice *dev) if (priv->init_voltage) pwm_regulator_set_voltage(dev, priv->init_voltage); - pwm_regulator_enable(dev, 1); - return 0; } -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
