Some platforms has very small sram to run spl code, so
it may have no enough sapce for so much malloc pool before
relocation in spl stage as the normal u-boot stage.
Use CONFIG_VAL(SYS_MALLOC_F_LEN) to fit this condition.
Signed-off-by: Andy Yan <andy....@rock-chips.com>
Acked-by: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
---
Changes in v3:
- use CONFIG_VAL(), which suggested by Simon
Changes in v2: None
arch/mips/cpu/start.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index d01ee9f..aa07654 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -60,8 +60,8 @@
sp, sp, GD_SIZE # reserve space for gd
and sp, sp, t0 # force 16 byte alignment
move k0, sp # save gd pointer
-#ifdef CONFIG_SYS_MALLOC_F_LEN
- li t2, CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+ li t2, CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_SUBU \
sp, sp, t2 # reserve space for early malloc
and sp, sp, t0 # force 16 byte alignment
@@ -75,7 +75,7 @@
blt t0, t1, 1b
PTR_ADDIU t0, PTRSIZE
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset
#endif
.endm
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
