Hi, I've built the rk3288 and puts the Rockchip header and SPL image first and then places the U-Boot image at block 256 (i.e. 128KB from the start of the SD card) as
# ./tools/mkimage -n rk3288 -T rksd -d spl/u-boot-spl-dtb.bin SPL # dd if=SPL of=/dev/mmcblk0 seek=64 # dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=256 Observed an issue of ROM not returning back and load u-boot, any help? Log: ----- spl:printf uart enabled in board_init_f spl:init dram U-Boot SPL 2017.07-00314-gd56b4b1-dirty (Jul 25 2017 - 15:45:49) Returning to boot ROM... thanks! -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
