This change introduces TPL variants of the REGMAP and SYSCON config
options (i.e. TPL_REGMAP and TPL_SYSCON in analogy to SPL_REGMAP and
SPL_SYSCON) in preparation of a finer-grained feature selection for
building feature-rich TPL variants.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Reviewed-by: Tom Rini <tr...@konsulko.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/core/Kconfig | 19 +++++++++++++++++++
drivers/core/Makefile | 4 ++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index 79a25c6..7afef1f 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -105,6 +105,16 @@ config SPL_REGMAP
support any bus type (I2C, SPI) but so far this only supports
direct memory access.
+config TPL_REGMAP
+ bool "Support register maps in TPL"
+ depends on TPL_DM
+ help
+ Hardware peripherals tend to have one or more sets of registers
+ which can be accessed to control the hardware. A register map
+ models this with a simple read/write interface. It can in principle
+ support any bus type (I2C, SPI) but so far this only supports
+ direct memory access.
+
config SYSCON
bool "Support system controllers"
depends on REGMAP
@@ -123,6 +133,15 @@ config SPL_SYSCON
by this uclass, including accessing registers via regmap and
assigning a unique number to each.
+config TPL_SYSCON
+ bool "Support system controllers in TPL"
+ depends on TPL_REGMAP
+ help
+ Many SoCs have a number of system controllers which are dealt with
+ as a group by a single driver. Some common functionality is provided
+ by this uclass, including accessing registers via regmap and
+ assigning a unique number to each.
+
config DEVRES
bool "Managed device resources"
depends on DM
diff --git a/drivers/core/Makefile b/drivers/core/Makefile
index fd2d4de..3d68c70 100644
--- a/drivers/core/Makefile
+++ b/drivers/core/Makefile
@@ -9,8 +9,8 @@ obj-$(CONFIG_DEVRES) += devres.o
obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE) += device-remove.o
obj-$(CONFIG_$(SPL_)SIMPLE_BUS) += simple-bus.o
obj-$(CONFIG_DM) += dump.o
-obj-$(CONFIG_$(SPL_)REGMAP) += regmap.o
-obj-$(CONFIG_$(SPL_)SYSCON) += syscon-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)REGMAP) += regmap.o
+obj-$(CONFIG_$(SPL_TPL_)SYSCON) += syscon-uclass.o
obj-$(CONFIG_OF_LIVE) += of_access.o of_addr.o
ifndef CONFIG_DM_DEV_READ_INLINE
obj-$(CONFIG_OF_CONTROL) += read.o
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
