Thanks for the reply.
If menuconfig and Kconfig are not supported yet, is there a way to configure my U-boot version? From: Ben Warren [mailto:biggerbadder...@gmail.com] Sent: 25 November 2009 15:33 To: Ioannis Kyriakopoulos Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] Unable to launch menuconfig On Wed, Nov 25, 2009 at 7:11 AM, Ioannis Kyriakopoulos <johnky...@hotmail.com> wrote: Hi all, I have downloaded the u-boot source and I am able to build it for my target (beagleboard). However, I am not able to launch menuconfig. I know that menuconfig works because I am able to launch it when I am building my Linux kernel. You're mistaken. There's a slow-moving movement towards using Kconfig (and thus menuconfig) in main line U-boot, but it's not there yet. $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- omap3_beagle_config Configuring for omap3_beagle board... $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- menuconfig Generating include/autoconf.mk Generating include/autoconf.mk.dep make: *** No rule to make target `menuconfig'. Stop. Any ideas? Thanks in advance. -limp _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
