Applied, thanks!
2017-07-29 6:14 GMT+09:00 Thomas Petazzoni
<thomas.petazz...@free-electrons.com>:
> The SuperH architecture allows to be run in either little or big
> endian mode. Some SuperH SoCs get the little vs. big endian decision
> through mode pins sampled at reset, so if big endian has been choosen
> by HW designers, it cannot be easily changed.
>
> Therefore, it makes sense to allow building U-Boot for SuperH in big
> endian mode. To allow this, the only change needed is to adjust the
> OUTPUT_FORMAT() in the linker script.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazz...@free-electrons.com>
> ---
> arch/sh/cpu/u-boot.lds | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/sh/cpu/u-boot.lds b/arch/sh/cpu/u-boot.lds
> index bbf9ff4..f185b4d 100644
> --- a/arch/sh/cpu/u-boot.lds
> +++ b/arch/sh/cpu/u-boot.lds
> @@ -9,7 +9,12 @@
>
> #include "config.h"
>
> +#ifdef CONFIG_SYS_BIG_ENDIAN
> +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-sh-linux")
> +#else
> OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
> +#endif
> +
> OUTPUT_ARCH(sh)
>
> MEMORY
> --
> 2.9.4
>
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
