Hi,

On 18 July 2017 at 03:51, Wadim Egorov <w.ego...@phytec.de> wrote:
> Sometimes it's helpful to know the reset reason caused in the SoC.
> Add reset reason detection for the RK3288 SoC.
> This will set an environemt variable which represents the reset reason.
>
> Signed-off-by: Wadim Egorov <w.ego...@phytec.de>
> Acked-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
>
> ---
> Changes in v2:
> - Added Acked-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
> - Clear cru_glb_rst_st
> - POR if cru_glb_rst_st is 0
> - RST if 1st or 2nd bit is set
>   Can be tested with mw 0xff7601b0 0xfffffdb9
>                      mw 0xff7601b4 0xffffeca8
>
> ---
>  arch/arm/mach-rockchip/rk3288-board.c | 35 
> +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/mach-rockchip/rk3288-board.c 
> b/arch/arm/mach-rockchip/rk3288-board.c
> index 613967c..da1995c 100644
> --- a/arch/arm/mach-rockchip/rk3288-board.c
> +++ b/arch/arm/mach-rockchip/rk3288-board.c
> @@ -11,6 +11,7 @@
>  #include <syscon.h>
>  #include <asm/io.h>
>  #include <asm/arch/clock.h>
> +#include <asm/arch/cru_rk3288.h>
>  #include <asm/arch/periph.h>
>  #include <asm/arch/pmu_rk3288.h>
>  #include <asm/arch/qos_rk3288.h>
> @@ -70,10 +71,44 @@ int rk3288_qos_init(void)
>         return 0;
>  }
>
> +static void rk3288_detect_reset_reason(void)
> +{
> +       struct rk3288_cru *cru = rockchip_get_cru();
> +       if (IS_ERR(cru))
> +               return;
> +
> +       switch (cru->cru_glb_rst_st) {
> +       case 0:
> +               setenv("reset_reason", "POR");
> +               break;
> +       case (1 << 0):
> +       case (1 << 1):
> +               setenv("reset_reason", "RST");
> +               break;
> +       case (1 << 2):
> +       case (1 << 3):
> +               setenv("reset_reason", "THERMAL");
> +               break;
> +       case (1 << 4):
> +       case (1 << 5):
> +               setenv("reset_reason", "WDOG");
> +               break;
> +       default:
> +               setenv("reset_reason", "unknown reset");
> +       }

Can you factor out the setenv() and put it (once) at the end? Inside
the switch() you can set a string var to POR or RST.

> +
> +       /*
> +        * Clear cru_glb_rst_st, so we can determine the last reset cause
> +        * for following resets.
> +        */
> +       rk_clrreg(&cru->cru_glb_rst_st, 0x3f);
> +}
> +
>  int board_late_init(void)
>  {
>         setup_boot_mode();
>         rk3288_qos_init();
> +       rk3288_detect_reset_reason();
>
>         return rk_board_late_init();
>  }
> --
> 1.9.1
>

Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to