Hi,

On Sun, Jul 30, 2017 at 5:43 PM, Álvaro Fernández Rojas
<nolt...@gmail.com> wrote:
> BCM63xx SPI controller is a bit tricky since it doesn't allow keeping CS
> active between transfers, so I had to modify the spi_flash driver in order
> to allow limiting reads.
>
> v5: Introduce changes suggested by Jagan Teki:
> - Use long structs for registers
> v4: Introduce changes suggested by Jagan Teki:
> - Add data for each HW controller instead of having two separate configs.
> v3: Fix bug introduced in v2: sizeof(cmd) vs len.
> Also rename BCM6338 SPI driver to BCM6348 SPI since BCM6338 is a stripped
> down version of the BCM6348.
> Switch to devfdt_get_addr_size_index().
> v2: Introduce changes requested by Simon Glass:
> - Always include command bytes when determining max write size.
> Also move SPI aliases from .dts to .dtsi files.

Did you sent the latest changes? I couldn't find it on patchwork even
with status "any"

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to