Hi Joe,

On 08.08.2017 17:57, Joe Hershberger wrote:
Hi Stefan (and Stefan),

On Tue, Aug 8, 2017 at 7:05 AM, Stefan Roese <s...@denx.de> wrote:
Hi Joe,

On 11.07.2017 10:04, Stefan Roese wrote:

On 21.06.2017 10:31, stef...@malvell.com wrote:

Huh? Sent from a typo email address?

Where is the problem with the Stefan Chulski's email address?
Sorry, I can't spot it.

That's pretty tedious. I
recommend fixing your git config. And if that's fine, I recommend
using patman so this won't happen again.

From: Stefan Chulski <stef...@marvell.com>

Issues were found during internal QA phase.

Stefan Chulski (10):
    net: mvpp2x: Add GPIO configuration support
    net: mvpp2x: fix phy connected to wrong mdio issue
    net: mvpp2x: Enable GoP packet padding in TX
    net: mvpp2x: fix BM configuration overrun issue
    net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
    net: mvpp2x: remove MBUS configurations from MvPP22 driver
    net: mvpp2x: Remove IRQ configuration from u-boot
    net: mvpp2x: Set BM pool high address
    net: mvpp2x: remove TX drain from transmit routine
    net: mvpp2x: Set BM poll size once during priv probe

   drivers/net/mvpp2.c | 189
   1 file changed, 94 insertions(+), 95 deletions(-)

Joe, do you have any comments on these mvpp2 patches?

Gently ping on these patches again. Joe, do you have any comments
on these? Do you want to take these patches via your tree? Or
should I push them if you don't have any objections?

Reviewing now. I generally use patchwork to remember what I have to
do. I guess if I didn't rely on that I would set up better work queue
email filters. Sorry for the delay.

I figured since the series is assigned to you in PW, that you wanted
it through your tree. I'm fine either way.

I assume that Tom assigned them to me (I didn't do it at least).
But I can definitely pull these patches via the Marvell tree, once
all open issues are resolved and all patches have your Acked-by

Thanks for the review!

U-Boot mailing list

Reply via email to