There are two same gmac node, remove one.

Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---

 arch/arm/dts/rk3399-evb.dts | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index f5af75b..f33e165 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -264,19 +264,3 @@
        rx_delay = <0x10>;
        status = "okay";
 };
-
-&gmac {
-        phy-supply = <&vcc_phy>;
-       phy-mode = "rgmii";
-       clock_in_out = "input";
-       snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-       snps,reset-active-low;
-       snps,reset-delays-us = <0 10000 50000>;
-       assigned-clocks = <&cru SCLK_RMII_SRC>;
-       assigned-clock-parents = <&clkin_gmac>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&rgmii_pins>;
-       tx_delay = <0x10>;
-       rx_delay = <0x10>;
-       status = "okay";
-};
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to