From: Sanchayan Maity <maitysancha...@gmail.com>

Trying to boot from an ext4 rootfs fails due to us defaulting to ext3.
While the downstream T20/T30 L4T kernel has issues with ext4 later TK1
L4T should work just fine with it. Hence enable ext4 for sdboot and
usbboot on TK1.

Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>
Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 include/configs/apalis-tk1.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index d6b226c..bb46768 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -87,7 +87,7 @@
                "&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define SD_BOOTCMD \
-       "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext3 rootwait\0" \
+       "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \
        "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
                "${vidargs}; echo Booting from SD card in 8bit slot...; " \
                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
@@ -98,7 +98,7 @@
                "&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define USB_BOOTCMD \
-       "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext3 rootwait\0" \
+       "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \
        "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
-- 
2.9.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to