>From: Joe Hershberger [mailto:joe.hershber...@ni.com]
>Sent: Thursday, August 10, 2017 2:45 PM
>To: Yuiko Oshino - C18177
>Cc: Marek Vasut; u-boot; Joe Hershberger
>Subject: Re: [U-Boot] [PATCH v3 1/2] usb: net: Add support for Microchip
>LAN75xx and LAN78xx
>On Thu, Aug 10, 2017 at 1:13 PM, <yuiko.osh...@microchip.com> wrote:
>> Hi Marek,
>>>From: Marek Vasut [mailto:ma...@denx.de]
>>>Sent: Wednesday, August 9, 2017 1:12 PM
>>>To: Yuiko Oshino - C18177; firstname.lastname@example.org
>>>Cc: Joe Hershberger
>>>Subject: Re: [PATCH v3 1/2] usb: net: Add support for Microchip
>>>LAN75xx and LAN78xx
>>>On 08/09/2017 06:25 PM, yuiko.osh...@microchip.com wrote:
>>>> From: Yuiko Oshino <yuiko.osh...@microchip.com>
>>>> Series-Changes: 3
>>>FYI, this will end in the commit message when applied, remove it or
>>>move it below the --- . Also commit message is missing.
>> I did my best to follow the patman instructions and I added "commit-notes:"
>but I guess it wasn't good enough.
>You need to not use commit notes here. That's for things that you want to be a
>note in the email, but not end up in the commit log.
Understood. So what is the "commit message" that Marek meant that I missed?
>> Should I always manually edit the patch before sending email in the patman?
>No, you shouldn't have to. The reason this failed to be removed is that you
>capitalized the 'C' in changes, and it didn't see it.
>Also, these tags are parsed and included as notes. You don't want to put these
>a commit notes tag. That's only needed for other random commit notes.
What are "threse"?
>> Also, when I am ready to update this patch again, should I do a series or
>> just this
>Do the series. Also, you should have the dependency patch first, and the
>dependent patch second (swap them around).
>> How can I update the [PATCH v] number? If just his patch, then will it be
>Go ahead and use v4. So use:
>>>> - All #ifdef CONFIG_DM_ETH and #endif are removed.
>>>> - The lan7x_eth_recv() is modifed to correctly support the Driver Model
>>>> and returns packet_en.
>>>> - Add mii_resolve_flowctrl_fdx() patch in the series.
>>>> Series-Changes: 2
>>>> - The wait_for_bit functions copy the real one.
>>>> - Uses phylib
>>>> - Unnecessary variables are removed
>>>> - All return values are checked
>>>> - Uses mii_resolve_flowctrl_fdx() from linux/mii.h
>>>> Signed-off-by: Yuiko Oshino <yuiko.osh...@microchip.com>
>>>> Add support for Microchip LAN7500, LAN7800 and LAN7850, USB to
>>>> 10/100/1000 Ethernet Controllers.
>The fact that this is in the notes means that you put it under "Commit-notes:"
Yes, I did. Is the Commit-notes: == Commit message?
Do I still need this tag?
Following tags are all I need?
Signed-off-by: Yuiko Oshino <yuiko.osh...@microchip.com>
Should I add Acked-by:?
>>>> drivers/usb/Kconfig | 2 +
>>>> drivers/usb/eth/Kconfig | 17 ++
>>>> drivers/usb/eth/Makefile | 2 +
>>>> drivers/usb/eth/lan75xx.c | 318 +++++++++++++++++++++++++++++
>>>> drivers/usb/eth/lan78xx.c | 477
>>>> drivers/usb/eth/lan7x.c | 495
>>>> drivers/usb/eth/lan7x.h | 230 +++++++++++++++++++++
>>>> 7 files changed, 1541 insertions(+)
Thank you, Joe.
U-Boot mailing list