Hi Simon, On Mon, Aug 14, 2017 at 11:01 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote: > On Mon, Aug 14, 2017 at 10:03 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote: >> Hi Simon, >> >> On Mon, Aug 14, 2017 at 3:06 AM, Simon Glass <s...@chromium.org> wrote: >>> Hi Jagan, >>> >>> On 10 August 2017 at 03:07, Jagan Teki <jagannadh.t...@gmail.com> wrote: >>>> Hi Simon/Philipp or any, >>>> >>>> I believe rk3288 has 20KB BootRom and 100KB internal SRAM and current >>>> u-boot can archive the maximum size of u-boot-spl-dtb.bin which the >>>> boot ROM will read is 32KB, do we have any possibility to increase the >>>> SPL size here. >>>> >>>> # ./tools/mkimage -n rk3288 -T rksd -d ./spl/u-boot-spl-dtb.bin out.img >>>> Warning: SPL image is too large (size 0x9000) and will not boot >>>> Error: image verification failed >>>> >>>> I tried to increase the spl_size from spl_infos (on tools/rkcommon.c) >>>> but not able to boot. >>> >>> I thought all boards were OK at present. Which board is this? Also >>> which toolchain are you using? There was a bug that bloating the >>> static data a bit. >> >> Board similar to firefly-rk3288 and not using >> ROCKCHIP_SPL_BACK_TO_BROM. Observed this when I try to add falcon mode >> support which eventually increased the SPL size. >> >> toolchain: arm-linux-gnueabi-gcc with version 6.3.1 20170109 (Linaro >> GCC 6.3-2017.02) > > And it is increasing further with gcc-4.7
Any comments? thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot