Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential
Output Voltage Test Compliance fails using default transmitter
settings
Change setting required for transmitter signal swings to pass
compliance tests.
Signed-off-by: Sriram Dash <sriram.d...@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gu...@nxp.com>
Signed-off-by: Ran Wang <ran.wan...@nxp.com>
---
Change in v3:
Use inline function to make code cleaner.
Correct typo of 'CONFIG_ARCH_LS1043A'.
Change in v2:
In function erratum_a008997():
1.Put a blank line after variable declaration.
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 ++++++++++++++++++++++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 4 ++++
3 files changed, 36 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 2dae539..a2de86b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -24,6 +24,7 @@ config ARCH_LS1043A
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
+ select SYS_FSL_ERRATUM_A008997
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
@@ -47,6 +48,7 @@ config ARCH_LS1046A
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
+ select SYS_FSL_ERRATUM_A008997
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
@@ -85,6 +87,7 @@ config ARCH_LS2080A
select SYS_FSL_ERRATUM_A009203
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
+ select SYS_FSL_ERRATUM_A008997
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
@@ -234,6 +237,9 @@ config SYS_FSL_ERRATUM_A009008
config SYS_FSL_ERRATUM_A009798
bool "Workaround for USB PHY erratum A009798"
+config SYS_FSL_ERRATUM_A008997
+ bool "Workaround for USB PHY erratum A008997"
+
config MAX_CPUS
int "Maximum number of CPUs permitted for Layerscape"
default 4 if ARCH_LS1043A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index dda19e0..f0dac99 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -100,6 +100,30 @@ static void erratum_a009798(void)
#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
}
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset)
+{
+ u32 val;
+
+ val = scfg_in32(scfg + offset / 4) & ~(0x7F << 9);
+ val |= (USB_PCSTXSWINGFULL << 9);
+ scfg_out32(scfg + offset / 4, val);
+}
+#endif
+
+static void erratum_a008997(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008997
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+ u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+ set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1);
+ set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2);
+ set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */
+}
+
#if defined(CONFIG_FSL_LSCH3)
/*
* This erratum requires setting a value to eddrtqcr1 to
@@ -248,6 +272,7 @@ void fsl_lsch3_early_init_f(void)
erratum_a008336();
erratum_a009008();
erratum_a009798();
+ erratum_a008997();
#ifdef CONFIG_CHAIN_OF_TRUST
/* In case of Secure Boot, the IBR configures the SMMU
* to allow only Secure transactions.
@@ -525,6 +550,7 @@ void fsl_lsch2_early_init_f(void)
erratum_a010539();
erratum_a009008();
erratum_a009798();
+ erratum_a008997();
}
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 8bd40e8..2e52078 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -339,10 +339,14 @@ struct ccsr_gur {
#define SCFG_BASE 0x01570000
#define SCFG_USB3PRM1CR_USB1 0x070
+#define SCFG_USB3PRM2CR_USB1 0x074
#define SCFG_USB3PRM1CR_USB2 0x07C
+#define SCFG_USB3PRM2CR_USB2 0x080
#define SCFG_USB3PRM1CR_USB3 0x088
+#define SCFG_USB3PRM2CR_USB3 0x08c
#define USB_TXVREFTUNE 0x9
#define USB_SQRXTUNE 0xFC7FFFFF
+#define USB_PCSTXSWINGFULL 0x47
#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
