Hi Pawel, On 17 August 2017 at 12:48, Paweł Jarosz <[email protected]> wrote: > Simon, > > > I had CONFIG_ENV_IS_NOWHERE set in wrong place (rk3066_common.h) > > Moving this config to board defconfig resolves the issue. > > Sorry for the confusion and thanks for the reply.
Ah OK, that's great! Thanks for letting me know. - Simon > > > Regards > > Paweł > > > W dniu 17.08.2017 o 19:46, Simon Glass pisze: >> >> Hi Pawel, >> >> >> On 17 August 2017 at 11:22, Paweł Jarosz <[email protected]> >> wrote: >>> >>> Hi, >>> >>> >>> i'm getting a error with last env patches (u-boot-rockchip repo). >>> >>> U-boot booting halts on env_init() with message: >>> >>> >>> env_driver_lookup_default: No environment driver for location 14 >>> >>> ... >>> >>> env_driver_lookup_default: No environment driver for location 14 >>> initcall sequence 60445dc8 failed at call 60430915 (err=-19) >>> ### ERROR ### Please RESET the board ### >>> >>> >>> 60445dc8 -> init_sequence_f() >>> >>> 60430915 -> env_init() >>> >>> >>> I have narrowed down the problem to env_get_default_location returning 14 >>> (ENVL_UNKNOWN) >>> >>> I have enabled CONFIG_ENV_IS_NOWHERE so it should return ENVL_NOWHERE. >>> >>> >>> Any ideas where to go from here? >> >> Which board is this please? Is this happening in SPL or U-Boot proper? >> >> Can you debug why env_get_default_location() is not returning >> ENVL_NOWHERE? >> >>> >>> Regards >>> >>> Paweł >>> >> Regards, >> Simon > > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
