On 8/31/2017 4:04 PM, Eric Nelson wrote: > On 08/31/2017 03:53 PM, Troy Kisky wrote: >> On 8/31/2017 2:28 PM, Troy Kisky wrote: >> >>> >>> Maybe if you change the WDOG pinmux it might work ? >>> >>> >> >> Worked for me >> >> => mm.l 302c0000 >> 302c0000: 00000003 ? 0 >> 302c0004: 00000001 ? q >> => bmod usb >> resetting ... >> > > Hmm... > > On SABRE-SD or Nitrogen7? >
Nitrogen7, It does show up in lsusb afterwards Bus 003 Device 100: ID 15a2:0076 Freescale Semiconductor, Inc. But imx_usb gets errors afterwards == work item filename /tftpboot/u-boot.nitrogen7 load_size 0 bytes load_addr 0x00000000 dcd 1 clear_dcd 0 plug 1 jump_mode 2 jump_addr 0x00000000 == end work item loading DCD table @0x910000 <<<-564, 1024 bytes>>> report 3 in err=-7, last_trans=0 c4 34 03 32 report 4 in err=-7, last_trans=0 c4 34 03 32 failed (status 0x320334c4) ________________ So, close but no cigar. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot