This commit adds support for GPIO reset lines matching the common linux "reset-gpios" devicetree binding.
Signed-off-by: Moritz Fischer <[email protected]> Cc: Heiko Schocher <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Marek Behún <[email protected]> Cc: Simon Glass <[email protected]> Cc: Michal Simek <[email protected]> --- drivers/i2c/muxes/pca954x.c | 44 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index 383f72f552..dd28ff057b 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2015 - 2016 Xilinx, Inc. + * Copyright (C) 2017 National Instruments Corp * Written by Michal Simek * * SPDX-License-Identifier: GPL-2.0+ @@ -9,7 +10,10 @@ #include <dm.h> #include <errno.h> #include <i2c.h> -#include <asm/gpio.h> + +#if CONFIG_DM_GPIO +# include <asm-generic/gpio.h> +#endif /* CONFIG_DM_GPIO */ DECLARE_GLOBAL_DATA_PTR; @@ -30,6 +34,9 @@ struct chip_desc { struct pca954x_priv { u32 addr; /* I2C mux address */ u32 width; /* I2C mux width - number of busses */ +#ifdef CONFIG_DM_GPIO + struct gpio_desc gpio_mux_reset; +#endif /* CONFIG_DM_GPIO */ }; static const struct chip_desc chips[] = { @@ -105,10 +112,45 @@ static int pca954x_ofdata_to_platdata(struct udevice *dev) return 0; } +static int pca954x_probe(struct udevice *dev) +{ +#ifdef CONFIG_DM_GPIO + struct pca954x_priv *priv = dev_get_priv(dev); + int err; + + err = gpio_request_by_name(dev, "reset-gpios", 0, + &priv->gpio_mux_reset, GPIOD_IS_OUT); + + /* it's optional so only bail if we get a real error */ + if (err && (err != -ENOENT)) + return err; + + /* dm will take care of polarity */ + if (dm_gpio_is_valid(&priv->gpio_mux_reset)) + dm_gpio_set_value(&priv->gpio_mux_reset, 0); + +#endif /* CONFIG_DM_GPIO */ + return 0; +} + +static int pca954x_remove(struct udevice *dev) +{ +#ifdef CONFIG_DM_GPIO + struct pca954x_priv *priv = dev_get_priv(dev); + + if (dm_gpio_is_valid(&priv->gpio_mux_reset)) + dm_gpio_free(dev, &priv->gpio_mux_reset); + +#endif /* CONFIG_DM_GPIO */ + return 0; +} + U_BOOT_DRIVER(pca954x) = { .name = "pca954x", .id = UCLASS_I2C_MUX, .of_match = pca954x_ids, + .probe = pca954x_probe, + .remove = pca954x_remove, .ops = &pca954x_ops, .ofdata_to_platdata = pca954x_ofdata_to_platdata, .priv_auto_alloc_size = sizeof(struct pca954x_priv), -- 2.14.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
