On Tue, Sep 05, 2017 at 03:11:14PM +0200, Marek Vasut wrote: > On RCar M3 and on RCar H3 newer than and not including ES1.0, the SD clock > must be divided by 4 rather than 2 because a hardware workaround present > only in the H3 ES1.0 has been removed from these chips. U-Boot currently > only supports M3 and H3 ES 2.0 and newer, so configure the SD pre-divider > to 4 to prevent SD instability. > > Signed-off-by: Marek Vasut <[email protected]> > Cc: Nobuhiro Iwamatsu <[email protected]>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
