The later-stage spl_board_init (as opposed to board_init_f) should set up board-specific details: these differ between the EVB-RK3399 and the RK3399-Q7 (Puma).
This moves spl_board_init back into the individual boards and removes the unneeded functionality from Puma. As we are touching these files, we also sort the #include directives and drop the inclusion of unneeded files. Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> --- arch/arm/mach-rockchip/rk3399-board-spl.c | 27 ------------------- board/rockchip/evb_rk3399/evb-rk3399.c | 32 +++++++++++++++++++++-- board/theobroma-systems/puma_rk3399/puma-rk3399.c | 15 ++++++++--- 3 files changed, 41 insertions(+), 33 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index 1c39d9b..8e38ef1 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -149,33 +149,6 @@ void board_init_f(ulong dummy) } } -void spl_board_init(void) -{ - struct udevice *pinctrl; - int ret; - - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("%s: Cannot find pinctrl device\n", __func__); - goto err; - } - - /* Enable debug UART */ - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); - if (ret) { - debug("%s: Failed to set up console UART\n", __func__); - goto err; - } - - preloader_console_init(); - return; -err: - printf("spl_board_init: Error %d\n", ret); - - /* No way to report error here */ - hang(); -} - #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c index d50c59d..506efff 100644 --- a/board/rockchip/evb_rk3399/evb-rk3399.c +++ b/board/rockchip/evb_rk3399/evb-rk3399.c @@ -3,13 +3,14 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include <common.h> +#include <asm/arch/periph.h> #include <dm.h> -#include <ram.h> #include <dm/pinctrl.h> #include <dm/uclass-internal.h> -#include <asm/arch/periph.h> #include <power/regulator.h> +#include <spl.h> DECLARE_GLOBAL_DATA_PTR; @@ -67,3 +68,30 @@ int board_init(void) out: return 0; } + +void spl_board_init(void) +{ + struct udevice *pinctrl; + int ret; + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("%s: Cannot find pinctrl device\n", __func__); + goto err; + } + + /* Enable debug UART */ + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); + if (ret) { + debug("%s: Failed to set up console UART\n", __func__); + goto err; + } + + preloader_console_init(); + return; +err: + printf("spl_board_init: Error %d\n", ret); + + /* No way to report error here */ + hang(); +} diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index c6f8eed..01b90e3 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -3,15 +3,16 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include <common.h> +#include <asm/arch/periph.h> +#include <asm/setup.h> #include <dm.h> -#include <misc.h> -#include <ram.h> #include <dm/pinctrl.h> #include <dm/uclass-internal.h> -#include <asm/setup.h> -#include <asm/arch/periph.h> +#include <misc.h> #include <power/regulator.h> +#include <spl.h> #include <u-boot/sha256.h> DECLARE_GLOBAL_DATA_PTR; @@ -59,6 +60,12 @@ out: return 0; } +void spl_board_init(void) +{ + preloader_console_init(); + return; +} + static void setup_macaddr(void) { #if CONFIG_IS_ENABLED(CMD_NET) -- 2.1.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot