Re: [U-Boot] [PATCH v2 2/2] LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.

[York Sun]

On 08/25/2017 02:03 AM, Udit Agarwal wrote:
> Add the secure boot defconfigs for QSPI boot on LS1088ARDB
> and LS1088AQDS platforms.
> 
> Signed-off-by: Udit Agarwal <udit.agar...@nxp.com>
> ---
>   configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 32 
> +++++++++++++++++++++++++++
>   configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 32 
> +++++++++++++++++++++++++++
>   2 files changed, 64 insertions(+)
>   create mode 100644 configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
>   create mode 100644 configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
> 
> diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig 
> b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
> new file mode 100644
> index 0000000..65653b8
> --- /dev/null
> +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
> @@ -0,0 +1,32 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_LS1088AQDS=y
> +# CONFIG_SYS_MALLOC_F is not set
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_PING=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_NETDEVICES=y
> +CONFIG_E1000=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_FSL_DSPI=y
> +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_FSL_LS_PPA=y
> +CONFIG_SECURE_BOOT=y
> +CONFIG_RSA=y
> +CONFIG_RSA_SOFTWARE_EXP=y
> diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig 
> b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
> new file mode 100644
> index 0000000..5afd559
> --- /dev/null
> +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
> @@ -0,0 +1,32 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_LS1088ARDB=y
> +# CONFIG_SYS_MALLOC_F is not set
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_PING=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_NETDEVICES=y
> +CONFIG_E1000=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_FSL_DSPI=y
> +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_FSL_LS_PPA=y
> +CONFIG_SECURE_BOOT=y
> +CONFIG_RSA=y
> +CONFIG_RSA_SOFTWARE_EXP=y
> 

Since you are adding new defconfig, can you keep these options sorted?

York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot