Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo driver. This allows the drivers to obtain pinmux and GPIO configuration from DT rather than hard-coding it in board files.
Signed-off-by: Marek Vasut <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> --- board/renesas/salvator-x/salvator-x.c | 2 ++ board/renesas/ulcb/ulcb.c | 2 ++ configs/r8a7795_salvator-x_defconfig | 4 ++++ configs/r8a7795_ulcb_defconfig | 4 ++++ configs/r8a7796_salvator-x_defconfig | 4 ++++ configs/r8a7796_ulcb_defconfig | 4 ++++ include/configs/rcar-gen3-common.h | 2 -- 7 files changed, 20 insertions(+), 2 deletions(-) diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c index 78fc22a0e8..9d9de58370 100644 --- a/board/renesas/salvator-x/salvator-x.c +++ b/board/renesas/salvator-x/salvator-x.c @@ -82,12 +82,14 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; +#ifdef CONFIG_SH_GPIO_PFC /* Init PFC controller */ #if defined(CONFIG_R8A7795) r8a7795_pinmux_init(); #elif defined(CONFIG_R8A7796) r8a7796_pinmux_init(); #endif +#endif #if defined(CONFIG_R8A7795) /* GSX: force power and clock supply */ diff --git a/board/renesas/ulcb/ulcb.c b/board/renesas/ulcb/ulcb.c index 9b96645d11..3ee6990b57 100644 --- a/board/renesas/ulcb/ulcb.c +++ b/board/renesas/ulcb/ulcb.c @@ -81,12 +81,14 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; +#ifdef CONFIG_SH_GPIO_PFC /* Init PFC controller */ #if defined(CONFIG_R8A7795) r8a7795_pinmux_init(); #elif defined(CONFIG_R8A7796) r8a7796_pinmux_init(); #endif +#endif /* USB1 pull-up */ setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); diff --git a/configs/r8a7795_salvator-x_defconfig b/configs/r8a7795_salvator-x_defconfig index 72aada3078..d8f5d35fb2 100644 --- a/configs/r8a7795_salvator-x_defconfig +++ b/configs/r8a7795_salvator-x_defconfig @@ -29,12 +29,16 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_UNIPHIER=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_PFC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig index aaad75a74d..1aa2e69ac6 100644 --- a/configs/r8a7795_ulcb_defconfig +++ b/configs/r8a7795_ulcb_defconfig @@ -28,10 +28,14 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_UNIPHIER=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_PFC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/r8a7796_salvator-x_defconfig b/configs/r8a7796_salvator-x_defconfig index cd10ecb3db..e0085d215b 100644 --- a/configs/r8a7796_salvator-x_defconfig +++ b/configs/r8a7796_salvator-x_defconfig @@ -30,12 +30,16 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_UNIPHIER=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_PFC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig index 107fa46b80..cbeda77bfd 100644 --- a/configs/r8a7796_ulcb_defconfig +++ b/configs/r8a7796_ulcb_defconfig @@ -29,10 +29,14 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_UNIPHIER=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_PFC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 6ed08e5bfc..6deed0dcd7 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -31,8 +31,6 @@ #define CONFIG_ARCH_CPU_INIT -#define CONFIG_SH_GPIO_PFC - /* console */ #define CONFIG_SYS_CBSIZE 2048 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -- 2.11.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
