Hi Fabio, Anatolji, just to save time : this is the list of boards that are affected by this problem.
cgtqmx6eval wandboard colibri_imx6 apalis_imx6 mx6cuboxi mx6sabresd imx6qdl_icore_rqs A good solution is also if the board maintainers (I CCed all of them) could fix this and I will apply afterwards Anatolji's patch. Best regards, Stefano On 20/09/2017 13:22, Anatolij Gustschin wrote: > Hi Fabio, > > On Wed, 20 Sep 2017 00:18:52 -0300 > Fabio Estevam feste...@gmail.com wrote: > >> Hi Stefano, >> >> On Tue, Sep 19, 2017 at 4:54 AM, Stefano Babic <sba...@denx.de> wrote: >> >>> Reason is clear: boards have in SPL a setup_display() that calls >>> enable_ipu_clock. But it makes no sense to have IPU support in SPL. >> >> Good catch, thanks! >> >> Anatolij, >> >> Do you plan to remove IPU code from SPL? > > I think we can do it by > > diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h > index 3ba4c29..b0f317b 100644 > --- a/include/configs/wandboard.h > +++ b/include/configs/wandboard.h > @@ -63,6 +63,7 @@ > #define CONFIG_PHY_ATHEROS > > /* Framebuffer */ > +#if !defined(CONFIG_SPL_BUILD) > #ifdef CONFIG_VIDEO > #define CONFIG_VIDEO_IPUV3 > #define CONFIG_VIDEO_BMP_RLE8 > @@ -74,6 +75,7 @@ > #define CONFIG_IMX_HDMI > #define CONFIG_IMX_VIDEO_SKIP > #endif > +#endif > > #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > #define CONFIG_EXTRA_ENV_SETTINGS \ > > I'll try to prepare a patch for other board configs later this week. > > Thanks, > > Anatolij > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot