The regulator bindings state that regulator prefixes are allowd to be
in upper or lower case. However pmic_bind_children from pmic_uclass uses
strncmp to compare DT node name against prefix. This comparison is case
sensitive hence the regulator driver prefix case matters.
Signed-off-by: Felix Brack <f...@ltec.ch>
---
doc/device-tree-bindings/regulator/regulator.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/device-tree-bindings/regulator/regulator.txt
b/doc/device-tree-bindings/regulator/regulator.txt
index 2cf4b9d..918711e 100644
--- a/doc/device-tree-bindings/regulator/regulator.txt
+++ b/doc/device-tree-bindings/regulator/regulator.txt
@@ -10,10 +10,10 @@ pmic: drivers/power/pmic/max77686.c
regulator: drivers/power/regulator/max77686.c
For the node name e.g.: "prefix[:alpha:]num { ... }":
-- the driver prefix should be: "prefix" or "PREFIX" - case insensitive
+- the driver prefix should be: "prefix" - case sensitive
- the node name's "num" is set as "dev->driver_data" on bind
-Example the prefix "ldo" will pass for: "ldo1", "ldo@1", "LDO1", "LDOREG@1"...
+Example the prefix "ldo" will pass for: "ldo1", "ldo@1", "ldoreg@1, ...
Optional properties:
- regulator-name: a string, required by the regulator uclass
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
