Hi Bin,
On 09/20/2017 08:02 AM, Bin Meng wrote:
Hi Tuomas,
On Wed, Sep 20, 2017 at 4:18 AM, Tuomas Tynkkynen
<tuomas.tynkky...@iki.fi> wrote:
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:
qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
(Note that the 'highmem=off' parameter to the 'virt' machine is required for
PCI to work in U-Boot.) This command line enables the following:
- u-boot.bin loaded and executing in the emulated flash at address 0x0
- A generated device tree blob placed at the start of RAM
- A freely configurable amount of RAM, described by the DTB
- A PL011 serial port, discoverable via the DTB
- An ARMv7 architected timer
- PSCI for rebooting the system
- A generic ECAM-based PCI host controller, discoverable via the DTB
Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
The following ones are supported by both U-Boot and Linux:
- To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device
ide-drive,drive=mydisk,bus=ahci.0
- To add an Intel E1000 network adapter, pass e.g.:
-net nic,model=e1000 -net user
With this parameter I got:
Warning: requested NIC (anonymous, model e1000) was not created (not
supported by this machine?)
I am using QEMU v2.5.0. It's better to mention the minimum required
QEMU version in the commit message as well.
I primarily tested with 2.9.0, but I found out that it will work in
2.5.0 as well by changing the syntax to
-netdev user,id=net0 -device e1000,netdev=net0
I will update the commit message accordingly.
- To add an EHCI-compliant USB host controller, pass e.g.:
-device usb-ehci,id=ehci
- To add a NVMe disk, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkky...@iki.fi>
---
v2:
- enable CONFIG_NVME
- alphasort correctly
- remove unnecessary gd declaration
- move board under board/emulation
- add MAINTAINERS
---
arch/arm/Kconfig | 10 +++++++
arch/arm/mach-qemu/Kconfig | 12 ++++++++
board/emulation/qemu-arm/MAINTAINERS | 6 ++++
board/emulation/qemu-arm/Makefile | 5 ++++
board/emulation/qemu-arm/qemu-arm.c | 33 ++++++++++++++++++++
configs/qemu_arm_defconfig | 28 +++++++++++++++++
include/configs/qemu-arm.h | 58 ++++++++++++++++++++++++++++++++++++
7 files changed, 152 insertions(+)
create mode 100644 arch/arm/mach-qemu/Kconfig
create mode 100644 board/emulation/qemu-arm/MAINTAINERS
create mode 100644 board/emulation/qemu-arm/Makefile
create mode 100644 board/emulation/qemu-arm/qemu-arm.c
create mode 100644 configs/qemu_arm_defconfig
create mode 100644 include/configs/qemu-arm.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 53eae8953e..1de5be7a72 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -630,6 +630,14 @@ config ARCH_MX5
select CPU_V7
select BOARD_EARLY_INIT_F
+config ARCH_QEMU
+ bool "QEMU Virtual Platform"
+ select CPU_V7
+ select ARCH_SUPPORT_PSCI
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
+
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM
@@ -1142,6 +1150,8 @@ source "arch/arm/mach-rmobile/Kconfig"
source "arch/arm/mach-meson/Kconfig"
+source "arch/arm/mach-qemu/Kconfig"
+
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-s5pc1xx/Kconfig"
diff --git a/arch/arm/mach-qemu/Kconfig b/arch/arm/mach-qemu/Kconfig
new file mode 100644
index 0000000000..3500b56cb0
--- /dev/null
+++ b/arch/arm/mach-qemu/Kconfig
@@ -0,0 +1,12 @@
+if ARCH_QEMU
+
+config SYS_VENDOR
+ default "emulation"
+
+config SYS_BOARD
+ default "qemu-arm"
+
+config SYS_CONFIG_NAME
+ default "qemu-arm"
+
+endif
diff --git a/board/emulation/qemu-arm/MAINTAINERS
b/board/emulation/qemu-arm/MAINTAINERS
new file mode 100644
index 0000000000..a803061ff4
--- /dev/null
+++ b/board/emulation/qemu-arm/MAINTAINERS
@@ -0,0 +1,6 @@
+QEMU ARM 'VIRT' BOARD
+M: Tuomas Tynkkynen <tuomas.tynkky...@iki.fi>
+S: Maintained
+F: board/emulation/qemu-arm/
+F: include/configs/qemu-arm.h
+F: configs/qemu_arm_defconfig
diff --git a/board/emulation/qemu-arm/Makefile
b/board/emulation/qemu-arm/Makefile
new file mode 100644
index 0000000000..716a6e9c28
--- /dev/null
+++ b/board/emulation/qemu-arm/Makefile
@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += qemu-arm.o
diff --git a/board/emulation/qemu-arm/qemu-arm.c
b/board/emulation/qemu-arm/qemu-arm.c
new file mode 100644
index 0000000000..e29ba4630f
--- /dev/null
+++ b/board/emulation/qemu-arm/qemu-arm.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2017 Tuomas Tynkkynen
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <fdtdec.h>
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ if (fdtdec_setup_memory_size() != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+void *board_fdt_blob_setup(void)
+{
+ /* QEMU loads a generated DTB for us at the start of RAM. */
nits: remove the ending period
+ return (void *)CONFIG_SYS_SDRAM_BASE;
+}
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
Can we use 'qemu-arm_defconfig", to be in consistent with the board name?
Sure.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot