Hi Chris,
On 26.09.2017 00:29, Chris Packham wrote:
For the internet historians,
On Thu, Sep 21, 2017 at 4:25 PM, Chris Packham <[email protected]> wrote:
On Wed, Sep 20, 2017 at 5:31 PM, Stefan Roese <[email protected]> wrote:
Hi Chris,
On 19.09.2017 20:58, Chris Packham wrote:
When you did the port from Marvell's source did you script any of the
tidy-up that you did along the way?
Not really. At least not in a reproducible way. I spent long
hours running Lindent, recursive-replace tools and especially
manual code inspection and re-formatting on this huge code.
Still the outcome is far from perfect, but hopefully better
that the original version.
I'm running up a new board and with the upstream u-boot DDR training
occasionally fails. But with the Marvell bootloader it doesn't fail.
The initial port was done from TIP-1.29 but Marvell are now up to
TIP-1.55 so there is probably some difference that results in my board
working.
One difference I've spotted so far is that Marvell enable 2T timing
mode for all Armada 38x boards (the comment says "resolve low freq
instability"). But doing that doesn't magically make my board work.
Did you compare all DDR register values (the "good" ones and the "bad"
ones) and only the the 2T timing is different?
There are more differences. 2T was the one that stuckout. As you know
working backwards from register values to where the code sets them can
be tricky with this code.
I'm thinking I need to compare TIP-1.29 with TIP-1.55 to look for
other differences but obviously that's going to be hard given the
style changes.
Has the style changed in between the Marvell versions as well? I
have not looked into this code for quite some time.
What I meant was u-boot has 1.29 and I have 1.55 from Marvell. The
oldest Marvell version I have is 1.34 which helped me find the 2T
thing. I'm wondering what differences exist between 1.29 and 1.34.
1.55 also has support for some newer integrated switch+CPU chips so it
is a little hard to separate those bits from the A38X code.
If you have any scripts (or even just a record of the
regexes) that you used would you be able to share them?
Please find some scripts attached, I've located that I have used while
doing this porting.
Thanks. That's a start at least.
In the end once I fixed the ecc_scrubbing[1] I stopped seeing the
training failures so I've basically stopped looking at the differences
between the Marvell bootloader and u-boot. But in the meantime I can
summarize the differences I have identified in case they might help
someone in the future.
* Marvell unconditionally enable 2T timing for A38X
* Different settings for RD/WR ODT particularly in situations using
only one chip-select.
There are more differences in the register dumps but I haven't looked
into the meaning of them.
Thanks for the update Chris. I'm currently build-testing the MVEBU
patches in Travis and will send the pull request, once this completes
without issues.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
