Commit 68e6eca ("net: phy: marvell 88e151x: Fix handling of RGMII
interface types") fixed the initialization of 88e151x phys, but made it
so that interfaces of type PHY_INTERFACE_MODE_RGMII had both RX and TX
delay bits cleared. The default (like in m88e1111s_config) is to have
both bits set.Hence, this patch changes the behavior in the PHY_INTERFACE_MODE_RGMII case so that both bits are set. Signed-off-by: Mario Six <[email protected]> --- drivers/net/phy/marvell.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 5d9f50a436..8eddf70c68 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -357,7 +357,8 @@ static int m88e1518_config(struct phy_device *phydev) reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E151x_PHY_MSCR); reg &= ~MIIM_88E151x_RGMII_RXTX_DELAY; - if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + if (phydev->interface == PHY_INTERFACE_MODE_RGMII || + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) reg |= MIIM_88E151x_RGMII_RXTX_DELAY; else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) reg |= MIIM_88E151x_RGMII_RX_DELAY; -- 2.11.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
