On 09/07/2017 10:10 PM, Rajesh Bhagat wrote: > Include common config_distro_defaults.h and config_distro_bootcmd.h > for u-boot enviroments to support automatical distro boot which > scan boot.scr from external storage devices(e.g. SD and USB) > and execute autoboot script. > > Signed-off-by: Bhaskar Upadhaya <[email protected]> > Signed-off-by: Rajesh Bhagat <[email protected]> > --- > configs/ls1012afrdm_qspi_defconfig | 1 + > include/configs/ls1012afrdm.h | 59 > ++++++++++++++++++++++++++++++++------ > 2 files changed, 51 insertions(+), 9 deletions(-) > > diff --git a/configs/ls1012afrdm_qspi_defconfig > b/configs/ls1012afrdm_qspi_defconfig > index fe95f04..42acff0 100644 > --- a/configs/ls1012afrdm_qspi_defconfig > +++ b/configs/ls1012afrdm_qspi_defconfig > @@ -46,3 +46,4 @@ CONFIG_DM_USB=y > CONFIG_USB_XHCI_HCD=y > CONFIG_USB_XHCI_DWC3=y > CONFIG_USB_STORAGE=y > +CONFIG_DISTRO_DEFAULTS=y > diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h > index 8a9444d..544dea0 100644 > --- a/include/configs/ls1012afrdm.h > +++ b/include/configs/ls1012afrdm.h > @@ -20,16 +20,57 @@ > #define CONFIG_SYS_MEMTEST_START 0x80000000 > #define CONFIG_SYS_MEMTEST_END 0x9fffffff > > +#ifndef CONFIG_SPL_BUILD > +#undef BOOT_TARGET_DEVICES > +#define BOOT_TARGET_DEVICES(func) \ > + func(USB, usb, 0) > +#endif > + > #undef CONFIG_EXTRA_ENV_SETTINGS > -#define CONFIG_EXTRA_ENV_SETTINGS \ > - "verify=no\0" \ > - "loadaddr=0x80100000\0" \ > - "kernel_addr=0x100000\0" \ > - "fdt_high=0xffffffffffffffff\0" \ > - "initrd_high=0xffffffffffffffff\0" \ > - "kernel_start=0x1000000\0" \ > - "kernel_load=0x96000000\0" \ > - "kernel_size=0x2800000\0" > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "verify=no\0" \ > + "fdt_high=0xffffffffffffffff\0" \ > + "initrd_high=0xffffffffffffffff\0" \ > + "fdt_addr=0x00f00000\0" \ > + "kernel_addr=0x01000000\0" \ > + "scriptaddr=0x80000000\0" \ > + "fdtheader_addr_r=0x80100000\0" \ > + "kernelheader_addr_r=0x80200000\0" \ > + "kernel_addr_r=0x96000000\0" \ > + "fdt_addr_r=0x90000000\0" \ > + "load_addr=0x96000000\0" \ > + "kernel_size=0x2800000\0" \ > + "console=ttyS0,115200\0" \ > + BOOTENV \ > + "boot_scripts=ls1012afrdm_boot.scr\0" \ > + "scan_dev_for_boot_part=" \ > + "part list ${devtype} ${devnum} devplist; " \ > + "env exists devplist || setenv devplist 1; " \ > + "for distro_bootpart in ${devplist}; do " \ > + "if fstype ${devtype} " \ > + "${devnum}:${distro_bootpart} " \ > + "bootfstype; then " \ > + "run scan_dev_for_boot; " \ > + "fi; " \ > + "done\0" \ > + "scan_dev_for_boot=" \ > + "echo Scanning ${devtype} " \ > + "${devnum}:${distro_bootpart}...; " \ > + "for prefix in ${boot_prefixes}; do " \ > + "run scan_dev_for_scripts; " \ > + "done;" \ > + "\0" \ > + "installer=load usb 0:2 $load_addr " \ > + "/flex_installer_arm64.itb; " \ > + "bootm $load_addr#$board\0" \ > + "qspi_bootcmd=echo Trying load from qspi..;" \ > + "sf probe && sf read $load_addr " \ > + "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
Did you intentionally leave the "\" at the end in above line? > + > +#undef CONFIG_BOOTCOMMAND > +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) > +#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" > +#endif You will not have CONFIG_BOOTCOMMAND for other than QSPI and SD boot. You probably don't have other boot method. If so, you can drop the "#if". York _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
